Posts Tagged ‘CT pool heat pumps’

Pool Heat Pump VS Gas Heater, New Jersey Pool Company Says Pool Heat Pumps Save Thousands

Saturday, January 15th, 2011

New Jersey pool company explains how pool heat pumps reduce the monthly heating costs of inground swimming pools by up to75%. So if you are an inground swimming pool owner who is looking for an efficient way to heat your vinyl lined pool, fiberglass pool or gunite pool a heat pump may be the best heating option for you!

Heat pumps are a very popular and cost efficient way to heat your  pool and reduce heating costs. Heat pumps are installed just as effortlessly as any other pool heater and the new advanced controls make operating the heat pump easier than ever. The heat pump is a great benefit because it allows you to significantly reduce your operating cost and extend your pool season without breaking the bank. NJ pool design ideas that move towards energy efficiency prove to be a worthwhile investment.

heat pump is a device that uses a small amount of energy to move heat from one location to another; usually by pulling heat out of the air or ground to heat a home or pool. It works much like a refrigerator in reverse by extracting the heat from the air, intensifying it with a compressor, and delivering the heat to the water as it passes through the system. The process is clean, efficient and most importantly cost effective. On average the heat pump operates at about ¼ the cost of your typical natural gas heater.

The heat pump is designed to maintain a constant higher temperature for the pool at a lower cost, but it is not intended for quick heating. Heat pumps are greatly affected by ambient temperature so if there are successive days of  bad weather the heat pump will take significantly more time to heat the pool. A standard gas heater normally raises the pool temperature 1 degree per hour. A heat pump may take 3 to 5 times longer depending on the ambient temperature. It is our recommendation that the heat pump be installed as the primary heat source with a natural gas heater as a backup. If you have a spa attached to the pool a natural gas heater is essential to raise the spa to a desired temperature in a short amount of time. What the heat pump effectively does is demote the expensive natural gas heater to secondary usage. With the dual system you can run the much more cost efficient heat pump constantly and only use the natural gas system when you want to raise the temperature to use the spa, when you’re planning for company that night or after extended bad weather.

What is the real life costs associated with this product? Let’s look at the additional costs involved with the heat pump and determine the time it will take to get a return on the investment. A +120,000 BTU heat pump, the minimal plumbing and wiring associated with installation could range from $4500 to $6500 depending on the manufacturer. A 900 sq. ft. pool with spa and waterfall on a natural gas system has an operating cost that ranges from $800 to $1200 a month depending on the usage habits and weather conditions. Operating the same pool on an electric heat pump system would cost about $250 to $450 per month. Now add in the operating cost of the back up gas heater which would be $100 to $300 per month (depending on ambient temperature and usage habits). The average consumer could expect a $400 to $450 per month savings and could recoup the cost of the heat pump in 2.5 to 4.5 years. Pool owners can find comfort knowing that going green will save them green!

By: Cipriano Custom Swimming Pools & Landscaping

A 5X International Design Winning Pool Company

Mahwah, New Jersey